يقوم ITD بالترويج للربط البصري لعرض اللمس الصناعي عالي التباين وانخفاض الانعكاس

May 15, 2014
آخر أخبار الشركة يقوم ITD بالترويج للربط البصري لعرض اللمس الصناعي عالي التباين وانخفاض الانعكاس
سيؤدي فهم الضوء المنعكس والتحكم فيه إلى تحسين أداء الشاشة بشكل كبير في أي ظروف إضاءة محيطة
 
A display's ability to be read in a bright environment has to do with the difference between its "lumination" and "illumination" from the outside environment. إن قدرة الشاشة على القراءة في بيئة مشرقة تتعلق بالفرق بين "الإضاءة" و "الإضاءة" من البيئة الخارجية. A display's brightness is its lumination. سطوع الشاشة هو لمعانه. Its brightness, referred to as Nits (Candela per meter2) is the amount of light energy being emitted from the display. سطوعها ، المشار إليه بـ Nits (Candela لكل متر 2) هو مقدار الطاقة الضوئية المنبعثة من الشاشة. Illumination is the amount of reflected light coming off of the display. الإضاءة هي مقدار الضوء المنعكس الخارج من الشاشة. Reflected light is a set amount of ambient light coming off the display. الضوء المنعكس هو مقدار معين من الضوء المحيط يخرج من الشاشة.
 
Light will travel through a variety of transparent materials; سوف ينتقل الضوء عبر مجموعة متنوعة من المواد الشفافة ؛ such as air, glass, plastic, and even water. مثل الهواء والزجاج والبلاستيك وحتى الماء. Each of these materials have an ability to transmit or conduct light; كل من هذه المواد لديها القدرة على نقل أو إجراء الضوء ؛ which is measured by their "indices of refraction". والذي يقاس بمؤشرات الانكسار الخاصة بهم. Light, which cannot transmit or conduct through the material, will either be absorbed or reflected back out of the material. الضوء ، الذي لا يمكن أن ينقل أو يمر عبر المادة ، إما أن يمتص أو ينعكس من المواد. In the case of an air-to-glass interface, the reflection will be 4.5% of the ambient light striking the face of the display. في حالة واجهة الهواء إلى الزجاج ، سيكون الانعكاس 4.5٪ من الضوء المحيط الذي يضرب وجه الشاشة. All surfaces that have an index mismatch will reflect and the reflection is cumulative. ستنعكس جميع الأسطح التي يوجد بها عدم تطابق في الفهرس ويكون الانعكاس تراكميًا. In the case of a standard glass or plastic window, there are three surfaces with an index mismatch which will create a total reflection of approximately 13.5% of the ambient light. في حالة النوافذ الزجاجية أو البلاستيكية القياسية ، هناك ثلاثة أسطح غير متطابقة في المؤشر مما سيؤدي إلى انعكاس كلي لما يقرب من 13.5٪ من الضوء المحيط. The reflected light is full spectrum white light and is added to a display's light output. الضوء المنعكس هو ضوء أبيض كامل الطيف ويتم إضافته إلى ناتج ضوء الشاشة. Reflected light is added to the display's white light, making a display's "lumination" increase. يضاف الضوء المنعكس إلى الضوء الأبيض للشاشة ، مما يزيد من "إضاءة" الشاشة. Likewise, the reflected light is added to a display's black level and colors as well. وبالمثل ، يضاف الضوء المنعكس إلى مستوى أسود الشاشة وألوانها أيضًا. This additional light makes black levels very diluted and instead of black, they appear grayish. هذا الضوء الإضافي يجعل مستويات الأسود مخففة للغاية وبدلاً من الأسود ، تظهر رمادية. Colors, with the additional white light, become pale and unsaturated. تصبح الألوان ، مع الضوء الأبيض الإضافي ، شاحبة وغير مشبعة. Whether a display is deemed viewable in daylight has less to do with its white level, and more to do with the contrast ratio between white and black. ما إذا كانت الشاشة قابلة للعرض في ضوء النهار ، فإن ذلك لا علاقة له بمستوى اللون الأبيض ، وأكثر من ذلك مع نسبة التباين بين الأبيض والأسود. Typically 3: 1 ratio is considered the absolute minimum ratio and levels closer to 10:1 contrast ratio is preferred. عادةً ما تعتبر نسبة 3: 1 النسبة الدنيا المطلقة ويفضل المستويات الأقرب إلى نسبة التباين 10: 1.
 
Optical bonding from ITD is a solid, transparent bond which optically couples to the face of the display. الترابط البصري من ITD هو رابط صلب وشفاف يتزاوج بصريًا مع واجهة الشاشة. The outer surface of the window is treated with anti-reflecting coating which also matches the front surface of the glass with the index of refraction of air. يتم معالجة السطح الخارجي للنافذة بطبقة مضادة للانعكاس تتطابق أيضًا مع السطح الأمامي للزجاج مع مؤشر انكسار الهواء. This combination reduces the surface reflection of the display and front cover glass to less than .5% of the ambient light. يقلل هذا المزيج من انعكاس سطح الشاشة وزجاج الغطاء الأمامي إلى أقل من 0.5٪ من الضوء المحيط. A reduction of reflection of this level, all but eliminates reflective loss in most ambient lighting conditions. تقليل انعكاس هذا المستوى ، إلا أنه يزيل الخسارة الانعكاسية في معظم ظروف الإضاءة المحيطة.
 
With reductions of this level, displays with 300-500 nits of brightness will be viewable in daylight or indirect lighting conditions. مع تخفيضات هذا المستوى ، يمكن عرض الشاشات ذات السطوع 300-500 شمعة في ضوء النهار أو ظروف الإضاءة غير المباشرة. At 500-800 nits' brightness, most displays will be completely sunlight viewable. عند سطوع 500-800 شمعة في المتر المربع ، ستكون معظم الشاشات قابلة لعرض ضوء الشمس بالكامل.
 
مقارنة الفرق قبل وبعد الربط البصري
 
آخر أخبار الشركة يقوم ITD بالترويج للربط البصري لعرض اللمس الصناعي عالي التباين وانخفاض الانعكاس  0
لمزيد من المعلومات ، يرجى الاتصال sales@itd-tech.com